Heavy Duty JPod Cable

Wiring harness for the CalAmp 4200 series of tracking devices. SPECIFICATIONS: Length: 15FT (5M) COMPATIBLE HARDWARE: CalAmp LMU 4200 tracking device

A serial adapter used when installing the Micronet tablet or RFID reader and connected directly to the tracking device. SUPPORTED HARDWARE: Micronet All-In-One Tablet

Windshield (or dash) mount antenna. SPECIFICATIONS; Stingray Adhesive Glass Mount GPS/GALILEO/Penta-band GSM/CDMA/UMTS/WCDMA Puck Antenna High Grade 3M Double Sided Tape 3M RG-174 –...

Windshield (or Dash) mounth antenna. Compatible with the LMU 4233 SPECIFICATIONS: Adhesive Glass Mount 2in1 GPS/GLONASS/GALILEO & 4G/3G/2G LTE GPS-GLONASS-GALILEO 1575-1610MHz 3M RG-174...

Standalone Emergency Button used by driver to indicate an issue in the vehicle.  COMPATIBLE HARDWARE: LMU 3640 LMU 4220 LMU 4223 LMU 4225 will not work with the LMU 3000...

Cable that connects directly to the tracking device on one end and the quick connect of the Micronet harness on the other. SPECIFICATIONS: Length: 12FT (4M) COMPATIBLE HARDWARE: Micronet...

A Y-cable for a light duty tracking device used to plug directly in to the OBDII port then attach the tracking device to one end leaving the other end for plugging into the hand held tester to...

This switch guard protects the stand-alone emergency (panic) button that is installed in the vehicle so that the driver can easier access it in the event of an emergency and will replace a guard...

Device that connects the tracking device and the OBDII port and required to read engine diagnostics codes. SUPPORTED HARDWARE: CalAmp LMU 4200 CalAmp LMU 4225

A mounting device used for the tablet to be mounted to the dash. COMPATIBLE HARDWARE: CalAmp 7P Tablet Micronet A317 Tablet Micronet A317 All-In-One